DOWNLOAD LAVA IRIS 349 SLEEK STOCK ROM

Artikel lava,

Below is the direct link to download the Lava Iris 349 Sleek Stock ROM (Firmware).

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

LAVA IRIS 349 SLEEK SPECS
Operating System Android 2.3 Chipset Spreadtrum Processor CPU: 1.0GHz, GPU: Storage RAM: 256MB, ROM: 512MB, up to 32GB micro SD Dimension 117.00 x 61.60 x 11.90 mm Connectivity Wi-Fi: 802.11/b/g/n, 2G: GSM, - Bluetooth v2.1 Camera Rear Camera: 2MP, Front Camera: 0.3MP Battery Capacity 1300mAh

LAVA IRIS 349SLEEK  STOCK ROM
Lava_Iris_349_Sleek_S102_20141020 DOWNLOAD ROM

How To Flash Using ResearchDownload or UpgradeDownload Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch ResearchDownload or UpgradeDownload. STEP 4: Click on the Settings-like button above Port. STEP 5: Select the PAC File from the Stock ROM (Firmware) you have downloaded. STEP 6: Click on Start button. STEP 7: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 8: Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on SPD. STEP 5: Select Write. STEP 6: Select device Chip from Choose type. STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Below is the direct link to download the Lava Iris 349 Sleek Stock ROM (Firmware).

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

LAVA IRIS 349 SLEEK SPECS
Operating System Android 2.3 Chipset Spreadtrum Processor CPU: 1.0GHz, GPU: Storage RAM: 256MB, ROM: 512MB, up to 32GB micro SD Dimension 117.00 x 61.60 x 11.90 mm Connectivity Wi-Fi: 802.11/b/g/n, 2G: GSM, - Bluetooth v2.1 Camera Rear Camera: 2MP, Front Camera: 0.3MP Battery Capacity 1300mAh

LAVA IRIS 349SLEEK  STOCK ROM
Lava_Iris_349_Sleek_S102_20141020 DOWNLOAD ROM

How To Flash Using ResearchDownload or UpgradeDownload Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch ResearchDownload or UpgradeDownload. STEP 4: Click on the Settings-like button above Port. STEP 5: Select the PAC File from the Stock ROM (Firmware) you have downloaded. STEP 6: Click on Start button. STEP 7: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 8: Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on SPD. STEP 5: Select Write. STEP 6: Select device Chip from Choose type. STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Read more »

DOWNLOAD LAVA IRIS 349 STOCK ROM

Artikel lava,

Below is the direct link to download the Lava Iris 349 Stock ROM (Firmware).

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

LAVA IRIS 349 SPECS
Operating System Android 2.3 Chipset Spreadtrum Processor CPU: 1.0GHz, GPU: Storage RAM: 256MB, ROM: 512MB, up to 32GB micro SD Dimension 115.8 x 61.5 x 13.3 mm Connectivity Wi-Fi: 802.11/b/g/n, 2G: GSM, - Bluetooth v2.1 Camera Rear Camera: 2MP, Front Camera: 0.3MP Battery Capacity 1400mAh

LAVA IRIS 349 STOCK ROM
Lava_Iris_349_S117_20130524 DOWNLOAD ROM

How To Flash Using ResearchDownload or UpgradeDownload Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch ResearchDownload or UpgradeDownload. STEP 4: Click on the Settings-like button above Port. STEP 5: Select the PAC File from the Stock ROM (Firmware) you have downloaded. STEP 6: Click on Start button. STEP 7: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 8: Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on SPD. STEP 5: Select Write. STEP 6: Select device Chip from Choose type. STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Below is the direct link to download the Lava Iris 349 Stock ROM (Firmware).

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

LAVA IRIS 349 SPECS
Operating System Android 2.3 Chipset Spreadtrum Processor CPU: 1.0GHz, GPU: Storage RAM: 256MB, ROM: 512MB, up to 32GB micro SD Dimension 115.8 x 61.5 x 13.3 mm Connectivity Wi-Fi: 802.11/b/g/n, 2G: GSM, - Bluetooth v2.1 Camera Rear Camera: 2MP, Front Camera: 0.3MP Battery Capacity 1400mAh

LAVA IRIS 349 STOCK ROM
Lava_Iris_349_S117_20130524 DOWNLOAD ROM

How To Flash Using ResearchDownload or UpgradeDownload Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch ResearchDownload or UpgradeDownload. STEP 4: Click on the Settings-like button above Port. STEP 5: Select the PAC File from the Stock ROM (Firmware) you have downloaded. STEP 6: Click on Start button. STEP 7: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 8: Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on SPD. STEP 5: Select Write. STEP 6: Select device Chip from Choose type. STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Read more »

DOWNLOAD LAVA IRIS 348 STOCK ROM

Artikel lava,

Below is the direct link to download the Lava Iris 348 Stock ROM (Firmware).

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

LAVA IRIS 348 SPECS
Operating System Android 4.4.2 (KitKat) Chipset Spreadtrum Processor CPU: 1.0GHz, GPU: Storage RAM: 256MB, ROM: 512MB, up to 32GB micro SD Dimension 116 x 61.6 x 11.3 mm Connectivity Wi-Fi: 802.11/b/g/n, 2G: GSM, - Bluetooth v2.1 Camera Rear Camera: 2MP, Front Camera: 0.3MP Battery Capacity 1100mAh

LAVA IRIS 348 STOCK ROM
Lava_Iris_348_V07_20141108 DOWNLOAD ROM

How To Flash Using ResearchDownload or UpgradeDownload Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch ResearchDownload or UpgradeDownload. STEP 4: Click on the Settings-like button above Port. STEP 5: Select the PAC File from the Stock ROM (Firmware) you have downloaded. STEP 6: Click on Start button. STEP 7: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 8: Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on SPD. STEP 5: Select Write. STEP 6: Select device Chip from Choose type. STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Below is the direct link to download the Lava Iris 348 Stock ROM (Firmware).

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

LAVA IRIS 348 SPECS
Operating System Android 4.4.2 (KitKat) Chipset Spreadtrum Processor CPU: 1.0GHz, GPU: Storage RAM: 256MB, ROM: 512MB, up to 32GB micro SD Dimension 116 x 61.6 x 11.3 mm Connectivity Wi-Fi: 802.11/b/g/n, 2G: GSM, - Bluetooth v2.1 Camera Rear Camera: 2MP, Front Camera: 0.3MP Battery Capacity 1100mAh

LAVA IRIS 348 STOCK ROM
Lava_Iris_348_V07_20141108 DOWNLOAD ROM

How To Flash Using ResearchDownload or UpgradeDownload Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch ResearchDownload or UpgradeDownload. STEP 4: Click on the Settings-like button above Port. STEP 5: Select the PAC File from the Stock ROM (Firmware) you have downloaded. STEP 6: Click on Start button. STEP 7: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 8: Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on SPD. STEP 5: Select Write. STEP 6: Select device Chip from Choose type. STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Read more »

DOWNLOAD LAVA IRIS 325 STYLE STOCK ROM

Artikel lava,

Below is the direct link to download the Lava Iris 325 Style Stock ROM (Firmware).

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

LAVA IRIS 325 STYLE SPECS
Operating System Android 4.4.2 (KitKat) Chipset MediaTek MT6572 Processor CPU: 1.0GHz dual-core, GPU: Mali-400 MP2 Storage RAM: 256MB, ROM: 2GB, up to 32GB micro SD Dimension 113.00 x 61.00 x 12.65 mm Connectivity Wi-Fi: 802.11/b/g/n, GSM : 900/1800 MHz - Bluetooth v3.0 Camera Rear Camera: 2MP, Front Camera: 0.3MP Battery Capacity 1400mAh

LAVA IRIS 325 STYLE STOCK ROM
Lava_Iris_325Style_S107_20140928 DOWNLOAD ROM

How To Flash Using SP Flash Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch SP Flash Tool. STEP 4: Click on Download. STEP 5: Select Scatter-loading. STEP 6: Select the Scatter File from the Stock ROM (Firmware) you have downloaded. STEP 7: Select Format and click Start. STEP 8: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 9: Patiently wait for device to be formatted. STEP 10: After format, STEP 11: Select Download and click Start. STEP 12: Connect device & Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on MTK. STEP 5: Select Write. STEP 6: Select Format ALL[Android] (Optional but recommended). STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Below is the direct link to download the Lava Iris 325 Style Stock ROM (Firmware).

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

LAVA IRIS 325 STYLE SPECS
Operating System Android 4.4.2 (KitKat) Chipset MediaTek MT6572 Processor CPU: 1.0GHz dual-core, GPU: Mali-400 MP2 Storage RAM: 256MB, ROM: 2GB, up to 32GB micro SD Dimension 113.00 x 61.00 x 12.65 mm Connectivity Wi-Fi: 802.11/b/g/n, GSM : 900/1800 MHz - Bluetooth v3.0 Camera Rear Camera: 2MP, Front Camera: 0.3MP Battery Capacity 1400mAh

LAVA IRIS 325 STYLE STOCK ROM
Lava_Iris_325Style_S107_20140928 DOWNLOAD ROM

How To Flash Using SP Flash Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch SP Flash Tool. STEP 4: Click on Download. STEP 5: Select Scatter-loading. STEP 6: Select the Scatter File from the Stock ROM (Firmware) you have downloaded. STEP 7: Select Format and click Start. STEP 8: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 9: Patiently wait for device to be formatted. STEP 10: After format, STEP 11: Select Download and click Start. STEP 12: Connect device & Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on MTK. STEP 5: Select Write. STEP 6: Select Format ALL[Android] (Optional but recommended). STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Read more »