DOWNLOAD BONTEL 5610 FIRMWARE

Artikel bontel,

Below is the direct link to download the Bontel 5610 Firmware.

Note:
Follow the instructions on how to flash the device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact Firmware of the device you want to flash because flashing a wrong firmware will make the device completely dead (can't power on, can't charge and will not be detected by a computer). 

How To Flash Using Volcano Box: STEP 1: Download & extract the Firmware on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Volcano Box. STEP 4: Click on Coolsand &... STEP 5: Select Write Flash. STEP 6: Select the Bin File from the Firmware you have downloaded. STEP 7: Select Auto-detect Pinouts (use pinouts connector). STEP 8: Click on the Run button. STEP 9: Patiently wait for device to connected. STEP 10: Once the device has been connected, STEP 11: Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Power off device, Insert USB Cable on the device (don't power on), Press & hold the "0" button key until Open USB Download appears on device screen. STEP 5: Click on Coolsand/RDA. STEP 6: Select Write. STEP 7: Click on the folder-like button to select Firmware on the location it is saved. STEP 8: After Selecting Firmware, STEP 9: Click on the Start button. STEP 10: Connect device. STEP 11: Patiently wait while the process completes. See Detailed Instruction with images

BONTEL 5610 FIRMWARE
- Coolsand chip - DOWNLOAD FIRMWARE

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please leave a comment after using this Firmware
Report if you cannot download this file.

Below is the direct link to download the Bontel 5610 Firmware.

Note:
Follow the instructions on how to flash the device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact Firmware of the device you want to flash because flashing a wrong firmware will make the device completely dead (can't power on, can't charge and will not be detected by a computer). 

How To Flash Using Volcano Box: STEP 1: Download & extract the Firmware on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Volcano Box. STEP 4: Click on Coolsand &... STEP 5: Select Write Flash. STEP 6: Select the Bin File from the Firmware you have downloaded. STEP 7: Select Auto-detect Pinouts (use pinouts connector). STEP 8: Click on the Run button. STEP 9: Patiently wait for device to connected. STEP 10: Once the device has been connected, STEP 11: Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Power off device, Insert USB Cable on the device (don't power on), Press & hold the "0" button key until Open USB Download appears on device screen. STEP 5: Click on Coolsand/RDA. STEP 6: Select Write. STEP 7: Click on the folder-like button to select Firmware on the location it is saved. STEP 8: After Selecting Firmware, STEP 9: Click on the Start button. STEP 10: Connect device. STEP 11: Patiently wait while the process completes. See Detailed Instruction with images

BONTEL 5610 FIRMWARE
- Coolsand chip - DOWNLOAD FIRMWARE

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please leave a comment after using this Firmware
Report if you cannot download this file.

Read more »

DOWNLOAD BONTEL i8 STOCK ROM

Artikel bontel,

Below is the direct link to download the Bontel i8 Stock ROM (Firmware).

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

BONTEL i8 MT6572 STOCK ROM
Android 4.4.2 a20be_ax_tianmao_i8_bontel_home_v003_20150710 DOWNLOAD ROM Learn how to easily download files from MEGA cloud storage PC or Moblile

How To Flash Using SP Flash Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch SP Flash Tool. STEP 4: Click on Download. STEP 5: Select Scatter-loading. STEP 6: Select the Scatter File from the Stock ROM (Firmware) you have downloaded. STEP 7: Select Format and click Start. STEP 8: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 9: Patiently wait for device to be formatted. STEP 10: After format, STEP 11: Select Download and click Start. STEP 12: Connect device & Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on MTK. STEP 5: Select Write. STEP 6: Select Format ALL[Android] (Optional but recommended). STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Below is the direct link to download the Bontel i8 Stock ROM (Firmware).

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

BONTEL i8 MT6572 STOCK ROM
Android 4.4.2 a20be_ax_tianmao_i8_bontel_home_v003_20150710 DOWNLOAD ROM Learn how to easily download files from MEGA cloud storage PC or Moblile

How To Flash Using SP Flash Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch SP Flash Tool. STEP 4: Click on Download. STEP 5: Select Scatter-loading. STEP 6: Select the Scatter File from the Stock ROM (Firmware) you have downloaded. STEP 7: Select Format and click Start. STEP 8: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 9: Patiently wait for device to be formatted. STEP 10: After format, STEP 11: Select Download and click Start. STEP 12: Connect device & Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on MTK. STEP 5: Select Write. STEP 6: Select Format ALL[Android] (Optional but recommended). STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Read more »

DOWNLOAD BONTEL T5 STOCK ROM

Artikel bontel,

Below is the direct link to download the Bontel T5 Stock ROM (Firmware).

Note:
[*] Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader, will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

BONTEL T5 SPECS
Operating System Android 4.4.2 Chipset MediaTek MT6572 Processor Storage Dimension Connectivity Camera Battery Capacity

BONTEL T5 STOCK ROM
A831E_AX_LJ_T5_BONTEL_V1.01_20150626 DOWNLOAD ROM Learn how to easily download files from MEGA cloud storage PC or Moblile

How To Flash Using SP Flash Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch SP Flash Tool. STEP 4: Click on Download. STEP 5: Select Scatter-loading. STEP 6: Select the Scatter File from the Stock ROM (Firmware) you have downloaded. STEP 7: Select Format and click Start. STEP 8: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 9: Patiently wait for device to be formatted. STEP 10: After format, STEP 11: Select Download and click Start. STEP 12: Connect device & Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on MTK. STEP 5: Select Write. STEP 6: Select Format ALL[Android] (Optional but recommended). STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Below is the direct link to download the Bontel T5 Stock ROM (Firmware).

Note:
[*] Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader, will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

BONTEL T5 SPECS
Operating System Android 4.4.2 Chipset MediaTek MT6572 Processor Storage Dimension Connectivity Camera Battery Capacity

BONTEL T5 STOCK ROM
A831E_AX_LJ_T5_BONTEL_V1.01_20150626 DOWNLOAD ROM Learn how to easily download files from MEGA cloud storage PC or Moblile

How To Flash Using SP Flash Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch SP Flash Tool. STEP 4: Click on Download. STEP 5: Select Scatter-loading. STEP 6: Select the Scatter File from the Stock ROM (Firmware) you have downloaded. STEP 7: Select Format and click Start. STEP 8: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 9: Patiently wait for device to be formatted. STEP 10: After format, STEP 11: Select Download and click Start. STEP 12: Connect device & Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on MTK. STEP 5: Select Write. STEP 6: Select Format ALL[Android] (Optional but recommended). STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Read more »

DOWNLOAD BONTEL E10 STOCK ROM

Artikel bontel,

Below is the direct link to download the Bontel E10 Stock ROM (Firmware).

Note:
[*] Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader, will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

BONTEL E10 SPECS
Operating System Android 4.4.2 Chipset MediaTek MT6580 Processor Storage RAM: 1GB, ROM: 8GB, up to 32GB micro SD Dimension 145.6 x 73 x 9.3mm mm Connectivity Camera Rear Camera: 5MP, Front Camera: 2MP Battery Capacity 2000mAh

BONTEL E10 STOCK ROM
yuanda72_cwet_kk-user 4.4.2 KOT49H DOWNLOAD ROM

How To Flash Using SP Flash Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch SP Flash Tool. STEP 4: Click on Download. STEP 5: Select Scatter-loading. STEP 6: Select the Scatter File from the Stock ROM (Firmware) you have downloaded. STEP 7: Select Format and click Start. STEP 8: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 9: Patiently wait for device to be formatted. STEP 10: After format, STEP 11: Select Download and click Start. STEP 12: Connect device & Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on MTK. STEP 5: Select Write. STEP 6: Select Format ALL[Android] (Optional but recommended). STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Below is the direct link to download the Bontel E10 Stock ROM (Firmware).

Note:
[*] Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader, will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

BONTEL E10 SPECS
Operating System Android 4.4.2 Chipset MediaTek MT6580 Processor Storage RAM: 1GB, ROM: 8GB, up to 32GB micro SD Dimension 145.6 x 73 x 9.3mm mm Connectivity Camera Rear Camera: 5MP, Front Camera: 2MP Battery Capacity 2000mAh

BONTEL E10 STOCK ROM
yuanda72_cwet_kk-user 4.4.2 KOT49H DOWNLOAD ROM

How To Flash Using SP Flash Tool: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch SP Flash Tool. STEP 4: Click on Download. STEP 5: Select Scatter-loading. STEP 6: Select the Scatter File from the Stock ROM (Firmware) you have downloaded. STEP 7: Select Format and click Start. STEP 8: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only. STEP 9: Patiently wait for device to be formatted. STEP 10: After format, STEP 11: Select Download and click Start. STEP 12: Connect device & Patiently wait for the process to complete. See Detailed Instruction with images Using Miracle Box: STEP 1: Download & extract the Stock ROM (Firmware) on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Click on MTK. STEP 5: Select Write. STEP 6: Select Format ALL[Android] (Optional but recommended). STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved. STEP 8: After Selecting Stock ROM (Firmware), STEP 9: Click on the Start button. STEP 10: Connect device holding volume + and volume - key or power key only. STEP 11: When device is connected, Select Block will pop-out, Click OK. STEP 12: Patiently wait while the process completes. See Detailed Instruction with images

Important Notes: [*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on). ==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here [*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens. [*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

Read more »

Download Bontel 7300 Firmware

Artikel bontel,

Learn how to flash/unbrick this device from here

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact Firmware of the device you want to flash because
 flashing a wrong Firmware, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)

BONTEL 7300 FIRMWARE

DOWNLOAD FIRMWARE

Please leave a comment after using this Firmware
Report if you cannot download this file.

Learn how to flash/unbrick this device from here

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact Firmware of the device you want to flash because
 flashing a wrong Firmware, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)

BONTEL 7300 FIRMWARE

DOWNLOAD FIRMWARE

Please leave a comment after using this Firmware
Report if you cannot download this file.

Read more »