Title Download Android Games / PC Games and Software Crack Full Version : DOWNLOAD M-HORSE BUTTERFLY STOCK ROM
Link Download Android Games / PC Games and Software Crack Full Version : DOWNLOAD M-HORSE BUTTERFLY STOCK ROM
DOWNLOAD M-HORSE BUTTERFLY STOCK ROM
Artikel m-horse,Tag : m-horse,
Flash this device using Miracle Box, Volcano or GPG Dragon Box
If you don't have a Miracle Box Use Miracle Box Crack Version.
Learn how to flash this device using Miracle Box from here
Learn how to flash this device using Miracle Box from here
Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact Firmware of the device you want to flash because
flashing a wrong Firmware, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
M-HORSE BUTTERFLY QUICK SPECS
5.0 - inch Touchscreen, 540 x 960 pixels
1.0 GHz single core processor
SC6820
512MB RAM
4GB Internal Memory
up to 32GB microSD
5MP Rear Camera, LED Flash, Auto Focus
2MP Front Camera
Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
3G UTMS 1900 MHz
WIFI 802.11 b/g/n
bluetooth 2.1
2000mAh Battery
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact Firmware of the device you want to flash because
flashing a wrong Firmware, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
M-HORSE BUTTERFLY QUICK SPECS
5.0 - inch Touchscreen, 540 x 960 pixels
1.0 GHz single core processor
SC6820
512MB RAM
4GB Internal Memory
up to 32GB microSD
5MP Rear Camera, LED Flash, Auto Focus
2MP Front Camera
Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
3G UTMS 1900 MHz
WIFI 802.11 b/g/n
bluetooth 2.1
2000mAh Battery
M-HORSE BUTTERFLY STOCK ROM (BIN File)
DOWNLOAD ROM
Quick Tips: Using Miracle Box
- Download Miracle Box Setup or use Cracked Version
- Extract & Launch
- Click on SPD
- Select this Chip SPD8810/6820 under Chose type
- Tick Write
- Tick USBCable when using USB Cord or Tick Scan Def when using Pinout Cable
- Select Firmware
- Click on Start Button
- Connect Device >> holding Volume + and Volume - button at the same time
- Wait for device to be recognized
- Once device is recognized, format begins...
- Patiently wait for process to complete
0 comments:
Post a Comment